Wood Floor Guide

Gym floors can take quite a beating, what with the high traffic it goes through every school year. You shouldn’t be surprised if you find your gym floor scuffed and dirty even before the school year ends.

Impressions of Ugly Floors

Scuffed and dirtied gym floors are an ugly sight and you don’t want to take too long before you start cleaning it up, otherwise your gym will look quite ugly and you might get some permanent damage to deal with.

Cleaning up your gym floor will usually involve refinishing it. There are several ways for you to refinish your floor. One of them is to water scrub your floor.

Water Scrubbing Floors

When you are water scrubbing your floor, the first thing that you should do is to put up wet floor signs and to restrict access to your work area. For one thing, you want to minimize the possibility of someone running in to your work area and slipping on the wet floor and getting injured. Your gym floor refinishing work will also go that much faster if you minimize traffic to your work area.

Sweep the dirt away from the area and mop off the dirt than won’t come out easy. Try to remove as much of the dirt and grit as you can. Let your floor dry.

Gym Floor Cleaners

There is a product on the market which can be used for gym floor finishing. These are usually marketed as gym floor cleaners. After you have thoroughly swept and mopped your gym floors, you can now apply your gym floor cleaner. Gym floor cleaners come in concentrate form which may be mixed with water before being applied to your gym floors. Some products, however recommend direct application. It is important to read and follow the instructions usually included with the product.

How to Apply Gym Cleaning Agents

To apply a gym floor cleaning agent on your gym floors, use a scrubbing pad, preferably one made of synthetic fibers. After application, immediately vacuum off the product from the floor, not allowing it to remain on the floor. You will need a wet vacuum for this. It is important to use as little water as possible when applying a gym floor cleaning agent. This can cause the wood to warp. After you have removed the product, rinse it off your gym floors and let your floors dry for 24 hours.

After drying, use a 120-grit sandpaper to sand off your floors. Clean all the resulting grit with a vacuum an apply a tack rag on the floor at least twice. After all the fine dust have been removed, apply your floor finish. There are some floor finishes which are specifically made for gym floors. Apply two to three coats using a lambs wool applicator. Between each coat, let the coat dry and buff off the coat with a 120-grit sandpaper. For the last coat, use a tack rag and vacuum the floors to finish.

When you have finished, close off the gym area for at least three days in order to get the best results. Performing the proper procedures can result in exactly the gym floor refinishing job you need. However, if the work proves to be too difficult, you can use professional gym floor refinishing services. They can do their work for you efficiently and professionally so your gym floor refinishing goes hassle free.

Obtain Glossy Bamboo Floors with the Right Cleaners