Laminate Installing: Do It Like a Pro

Laminate installing procedures can be done by a professional or by you. Usually, you are highly advised to have the former work for you, since their knowledge, expertise, and experience can guarantee an exceptional job. However, if you don’t like paying for the laminate flooring installation, you can do it on your own.

The Right Way of Installing Laminate Flooring

Here are the laminate flooring installation instructions that you can follow:

1. Gather the materials that you’re going to need. You can’t go on installing wood laminate if you don’t have the right materials with you. Usually, for your laminate flooring installation project, you’re going to use a tape measure, utility knife, nails, coping saw, hammer, rubber mallet, laminate floors, pull bar, and underlayment pad. A lot of these laminate installing materials can be found in your home, such as in your garage. But if you lack some, you can just drop by to your favorite home depot.

2. Get the instructions ready. If you have been doing the laminate floor installing project for many times now, this is no longer a problem for you. You may have already memorized it at the back of your mind. Nevertheless, for the beginners, laminate floors installing process may require a little help from a guide. You can ask them from a home depot, from the manufacturers of the laminated floors, or from the World Wide Web. Indeed, there are a lot of sources that you can go to if you need help when it comes to laminate installing.

3. Prepare the floor. In truth, laminate installing is far easier than hardwood installing. However, it can be difficult too especially if you already have an existing flooring. What you need to do is to get rid of the previous one. For example, if you’ve made use of carpets, you have to keep away the fabric and the padding. You also have to make sure that the tack strips are completely removed from the floor. You also have to get rid of dust and dirt, anything that will cause the laminated floors to be uneven. If there are dips on the floor, ensure that you can fill them up with concrete in order to level them out. If by laminate installing process you realize that the subfloor is already in such a bad condition, you may have to use a plywood subfloor.

Other obstructions can include baseboards, moldings, and even your door. Thus, you also have to take them off for a while, while you’re trying to attach the laminate floors into the floor.

4. Join the underlayment pad. This is the first step that you need to do when you’re going to lay your laminates into the floor. The pads can be joined together with the use of a plastic tape or even a duct tape. Then you start from the middle of the room, moving to the sides. If there are excess during your laminate flooring, make sure that you can cut off the groove sides. You also need a clearance between the wall, door, and floor since laminates are considered to be floating floors.